Saturday, 29 May 2021

Rigorous Testing Ensures AirOxi Products Are Of Top Quality And Better Than Cheap Knockoffs

Rigorous Testing Ensures AirOxi Products Are Of Top Quality And Better Than Cheap Knockoffs


Biofloc aeration is different from aeration in growout ponds in 3 very distinct ways

- Aeration required is intense because the BOD (Biological Oxygen Demand) is substantially higher due to probiotics and phytoplankton that feed on the sludge – to ensure the carbon-nitrogen cycle is balanced. The dissolved oxygen required is hence quite high as compared to growout ponds

- Usually, Biolfoc aquaculture is done in tanks or small-sized ponds, often indoors or covered in shade, in order to manage them better. This results in a smaller surface area of the water exposed to the atmosphere and hence the natural dissolution of oxygen is less, so artificial aeration needs to be much more than in growout ponds, and yet the traditional methods of paddlewheel aerator or

- The floc needs to be constantly moved and the water movement needed is high. So the diffused aeration needs to also agitate the water. Hence the diffused aeration system cannot be very fine as done in hatcheries, otherwise, it may give good dissolved oxygen but still, the performance may not be suitable for BFT


Armed with this information AirOxi has developed and launched 3 special aeration tubes:

1. AirOxi NC – 16 mm

2. AirOxi Star

3. AirOxi Xtra

For more information visit: https://www.airoxitube.com/rigorous-testing-ensures-airoxi-products-are-of-top-quality-and-better-than-cheap-knockoffs/

AirOxi – NC 16 mm –The Best Performing Low Cost And Maintenance Aeration Tube

AirOxi – NC 16 mm –The Best Performing Low Cost And Maintenance Aeration Tube


AirOxi – NC 16 mm is a revolutionary technology brought to you by the AirOxi tube that functions by surface contact among air and water. AirOxi – NC 16 mm gets water and air into close contact with each other by uncovering drops sheets of water to the air or by presenting little air pockets of air and allowing them to ascend through the water. This in turn breaks down the gases which are then eliminated from the solution to escape into the encompassing air. AirOxi – NC 16 mm also showcases the ability to oxidize broken up metals, and create unstable natural synthetic substances to ensure nothing creates a challenge for your proper aeration process.

For more information visit: https://www.airoxitube.com/airoxi-nc-16-mm-the-best-performing-low-cost-and-maintenance-aeration-tube/